A new catalyst for oil and gas processing
A team of scientists from the Research Institute of Chemistry (RIC) of RUDN University together with colleagues from major scientific centers created a new catalyst - a substance that activates Oxidation processes in low-reactive components of oil and gas. The new method of hydrocarbon processing will help efficiently produce valuable organic substances such as acids and alcohols, using a reaction that requires only minor heating and no increased pressure.
The structure of pentanuclear prismatic metallasilsesquioxanes (copper and cobalt-containing).
Alexey Bilyachenko
"The catalysts we've created contain silicon (or germanium) and metal (copper, iron, cobalt, etc.). They are able to easily break the bonds between carbon and hydrogen atoms both in saturated and unsaturated hydrocarbons (the main components of oil and gas) and turn them into valuable products: alcohols, acids, and ethers. This is a topical subject - some works on the activation of carbon-hydrogen bonds were shortlisted for the 2017 Nobel Prize in Chemistry," - explains Alexey Bilyachenko, one of the co-authors of the work, candidate of chemical sciences, and deputy director of Research Institute of Chemistry RUDN University.
In the course of their work specialists applied synthetic methods using the abilities of organic silicon and germanium derivatives to form unusual 3-dimensional structures incorporating atoms of different metals. These framework compounds are soluble in organic solvents increasing the activity of a catalytical particle. Moreover, the structure of the matrix determines the direction of the "catalyst' attack" (for instance, the oxidation of an organic molecule is targeted to certain positions of a reagent molecule).
The catalysts described in the work are classified as prismatic metallasilsesquioxanes. These compounds consist of a middle metal-containing layer located between two layers of silicon-containing cycle. Every atom of silicon is connected to an organic substitute.
Structural features and "nuclearity" of metal silsesquioxanes (i.e. the number of metal atoms in the compound) are highly dependent on synthesis conditions which causes certain difficulties for researchers. One of the main results of the team's work is determining necessary components of a reactive mixture that provides for getting a final product with a certain number of metal atoms thus determining further properties of a catalyst. Namely, the researchers showed the possibility of targeted production of pentanuclear products when synthesizing compounds containing copper, cobalt, and nickel ions with the use of a well-known heterocyclic compound pyridine. Notably, the products formed in other systems were hexanuclear.
Another important discovery was the stability of the rare pentanuclear structure in the course of transition from solid matter to a solution. It was shown on the example of a copper-containing compound. After replacing pyridine with dimethyl formamide, a solvent that is widely used in lab work, the researchers found out (using XRD investigations) that both the source and the target compounds had the same pentanuclear structure. This indicates quite high stability of the framework compound which is important in order to extend the period of a catalyst's activity in a solution.
Catalytical experiments presented in this work show that a pentanuclear copper-containing compound is effective in homogeneous catalyst of the oxidation of secondary alcohol (to ketones) and alkanes (to alkylhydroperoxides) with the use of peroxides. Notably, these reactions take place in "mild" conditions, that is, after minor heating and without increased pressure. The discovered methods of oil and gas processing by means of hydrocarbons activation with metal-containing compounds have an obvious advantage over the usual cracking and pyrolysis technologies that required expensive temperature- and pressure-resistant equipment.
"Obviously, the new processing methods open numerous prospects both for fundamental academic science and practical application," - summarizes Alexey Bilyachenko, deputy director of Research Institute of Chemistry RUDN University.
Original publication
Alexey N. Bilyachenko, Alena N. Kulakova, Lidia S. Shul'pina, Mikhail M. Levitsky, Alexander A. Korlyukov, Victor N. Khrustalev, Yan V. Zubavichus, Pavel V. Dorovatovskii, Ul'yana S. Tsareva, Elena S. Shubina, Artem A. Petrov, Nikolay V. Vorontsov, Georgiy B. Shul'pin; "Family of penta- and hexanuclear metallasilsesquioxanes: Synthesis, structure and catalytic properties in oxidations"; J Organometallic Chem.; 2017
Other news from the department science
![[Fe]-hydrogenase catalysis visualized using para-hydrogen-enhanced nuclear magnetic resonance spectroscopy](https://img.chemie.de/Portal/News/675fd46b9b54f_sBuG8s4sS.png?tr=w-712,h-534,cm-extract,x-0,y-16:n-xl)
Get the chemical industry in your inbox
From now on, don't miss a thing: Our newsletter for the chemical industry, analytics, lab technology and process engineering brings you up to date every Tuesday and Thursday. The latest industry news, product highlights and innovations - compact and easy to understand in your inbox. Researched by us so you don't have to.
Most read news
More news from our other portals
See the theme worlds for related content
Topic world Synthesis
Chemical synthesis is at the heart of modern chemistry and enables the targeted production of molecules with specific properties. By combining starting materials in defined reaction conditions, chemists can create a wide range of compounds, from simple molecules to complex active ingredients.
Topic world Synthesis
Chemical synthesis is at the heart of modern chemistry and enables the targeted production of molecules with specific properties. By combining starting materials in defined reaction conditions, chemists can create a wide range of compounds, from simple molecules to complex active ingredients.
