A fast reactor system to shorten the lifetime of long-lived fission products
Satoshi Chiba Tokyo Institute of Technology
The new method could dramatically reduce the effective half-life (an indicator of the amount of time it takes to bring radioactive materials down to safe levels) of long-lived fission products (LLFPs) from hundreds of thousands of years to within a hundred years.
How to dispose of nuclear waste is one of the biggest dilemmas facing the world today. The issue concerns what to do with radioactive waste after uranium and plutonium have been recovered from spent nuclear fuel using reprocessing methods such as Plutonium Uranium Redox EXtraction (PUREX).
Although burying waste deep underground is widely viewed as the most viable option, a number of strategies are being explored to reduce the stockpile of depleted fuel. One of the most promising is the partitioning and transmutation (P&T) strategy. This involves separating fuel into minor actinides (MAs) and LLFPs followed by the transmutation of MAs and LLFPs into shorter-lived nuclides.
So far, the P&T strategy has been limited by the costly and cumbersome need to separate LLFP isotopes before they can undergo transmutation. Also, some LLFPs, owing to their small neutron capture cross sections, are not able to capture enough neutrons for effective transmutation to occur.
The new study led by Satoshi Chiba at Tokyo Tech shows that effective transmutation of LLFPs can be achieved in fast spectrum reactors without the need for isotope separation. By adding a moderator (or slowing-down material) called yttrium deuteride (YD2), the team found that LLFP transmutation efficiency increased in the radial blanket and shield regions of the reactor. The researchers say that this is due to the moderator's ability "to soften the neutron spectrum leaking from the core".
Chiba and his co-workers focused on six LLFPs: selenium-79, zirconium-93, technetium-99, palladium-107, iodine-129 and caesium-135. Calculations showed that the effective half-lives of these LLFPs could be drastically reduced so that total radiotoxicity at long cooling time domain will be efficiently reduced (see Figure).
In experiments of this kind, the support ratio (that is, the ratio of the transmutation rate to the production rate) is an important indicator of transmutation efficiency. The team showed that support ratios of over 1.0 were achieved for all six LLFPs tested, representing a vast improvement on previous findings.
Using their method, the researchers say that the 17,000 tons of LLFPs now in storage in Japan could potentially be disposed of using ten fast spectrum reactors. Their method also has the advantage of contributing to electricity generation and supporting efforts towards nuclear non-proliferation.
Original publication
Most read news
Other news from the department science
These products might interest you
Berghof Reaktortechnologie - Hoch- und Niederdruckreaktoren, Druckbehälter und metallfreie Reaktoren by Berghof
Safe high- and low-pressure systems for aggressive media
Corrosion-resistant reactors with PTFE lining - individually configurable
BUCHI MINICLAVE by C3 Prozess- und Analysentechnik
Flexible small reactor systems - acid resistance, visual control and individual customization options for a wide range of applications!
PhotoSyn™ by Uniqsis
Experience the future of photochemistry
Flow reactor with user-friendly control for higher yields and selectivity
Get the chemical industry in your inbox
From now on, don't miss a thing: Our newsletter for the chemical industry, analytics, lab technology and process engineering brings you up to date every Tuesday and Thursday. The latest industry news, product highlights and innovations - compact and easy to understand in your inbox. Researched by us so you don't have to.