Sartorius Campus expands: Official opening of the new manufacturing facility for laboratory instruments
The largest single investment of Sartorius Campus totaling around 42 million euros
With its new facility for the manufacture of laboratory instruments, Sartorius provides high-quality production conditions and an advanced, efficient work environment. The biopharmaceutical and laboratory equipment supplier officially opened its approximately 42-million-euro new building as part of Sartorius Campus in the presence of some 250 guests, including Lower Saxony's Governor, Stephan Weil, and the Mayor of the City of Goettingen, Rolf-Georg Köhler. Around 450 employees build laboratory instruments, such as balances, ultrapure water systems and moisture analyzers, at this facility covering about 25,000 square meters, or nearly 270,000 square feet, in the industrial zone of Grone in Goettingen.
Sartorius AG
The production facility, to which the State of Lower Saxony and the German federal government together contributed 4.2 million euros, represents the largest single investment of Sartorius Campus. On the whole, Sartorius is investing around 500 million euros in its Campus up to completion of construction scheduled for the end of 2018. The new Group headquarters will combine two Goettingen sites and, apart from providing more capacity for manufacture and administration, offers an attractive work environment. Moreover, the Campus grounds covering around 170,000 square meters, or 1,829,865 square feet, can be used to further expands its facilities.
The new building combines different manufacturing sites, formerly spread out at various locations, all under one roof: parts manufacture, prototype construction, calibration center, an extended vocational training workshop and an administration complex. Glass expanses of close to 7,000 square meters, or 75,350 square feet, provide plenty of daylight throughout all areas of the building; a modern office design permits efficient work. As highly accurate balances are also calibrated inside, the building is protected from temperature fluctuations and protected by a foundation isolated from vibration by decoupling.
Other news from the department manufacturing
These products might interest you
New
MX-scales, MR-scales, MA-scales, LA-scales by Mettler-Toledo
New generation of laboratory balances for a wide range of applications
Excellent performance, durable instruments and simple operation
VICI DBS ZeroAir by VICI
Generate up to 30 L/min of analytically pure air yourself – for stable baseline GC-FID applications
Increase the sensitivity of your GC-FID analysis while reducing costs
HYDROTHERM by C. Gerhardt
Efficiency in food analysis: Safe and precise total fat determination made easy
Fully automatic acid hydrolysis in 90 minutes - validated for continuous operation
Mars 6 by CEM
Everything under Control - with This Intelligent Microwave Digestion System
High Sample Throughput with Just One Click
LabBox by HiTec Zang
Automation made easy for every laboratory
Discover the all-in-one automation solution for greater efficiency
Stainless steel reactors for high pressures and vacuum by JUCHHEIM Laborgeräte
Customized stainless steel reactors - configured for your needs
Perfect for extraction, digestion, hydrolysis, hydrogenation or synthesis
PG 85 by Miele
Powerful, safe, flexible: Compact lab washers with intelligent wash system
Developed for the reprocessing of laboratory glassware for analytical experiments
CrystalBreeder by Technobis
CrystalBreeder: the next generation multi-reactor crystallization platform
Enhance your early stage solid state screening. New: controlled evaporation & vapor diffusion modes
APU sim by Analytik Jena
APU sim Automatic Preparation Unit
APU sim The Clever Sample Preparation System According to Column Method
SmartCheck by Mettler-Toledo
Check Pipette Dosing Accuracy - Lightning Fast in Under a Minute
Detect dosing errors before it gets expensive
Automated Fusion Equipment by XRF Scientific
Automated Fusion Equipment
Sample Preparation at Highest Level
Catalogue: Labware made of precious metals by XRF Scientific
Labware made of precious metals
For sample preparation at highest level
BIOS ANALYTIQUE - Soluciones de Renting y Leasing para laboratorios by Bios Analytique
Specialists in the rental and leasing of scientific equipment for laboratories throughout Europe
Whether you have an unexpected requirement or limited budget, we have the perfect solution for you
Automatische XPR-Waagen by Mettler-Toledo
Production of standards, samples and concentrations - fast and reliable
Automate the weighing processes in your laboratory - ideal also for sample prep at chromatography
OHAUS Laboratory equipment by Ohaus
Do More with OHAUS Laboratory Equipment
Do Not Limit Yourself to Just Measurement! Discover Ingenious Portfolio
P-50 by Mettler-Toledo
Fast and Error-free Documentation
The all-in-one printing solution
FlowSyn and FlowSyn Maxi by Uniqsis
Continuous Flow Chemistry Systems for reaction optimisation and scale up
Perform reactions up to 300°C and 100 bar from 0.1 - 100 ml /minute
OHS Series: Overhead Stirrers by Velp Scientifica
State-of-the-art stirring power for a wide range of applications
Reliable overhead stirrers for different requirements in terms of viscosity and volume
Systec H-Series by Systec
Safe, reproducible and validatable sterilization of liquids, solids and waste
Autoclaves with 65-1580 liters usable space, flexibly expandable for various applications
Get the chemical industry in your inbox
From now on, don't miss a thing: Our newsletter for the chemical industry, analytics, lab technology and process engineering brings you up to date every Tuesday and Thursday. The latest industry news, product highlights and innovations - compact and easy to understand in your inbox. Researched by us so you don't have to.
