LANXESS doubles membrane production capacity
Specialty chemicals company LANXESS – as announced previously in mid-2017 – has doubled its membrane capacities. “We have expanded the capacity of our plant in Bitterfeld so that we can continue meeting the rising demand for reverse osmosis membrane elements. This step makes us even more attractive as a supplier to major customers,” says Jean-Marc Vesselle, head of the Liquid Purification Technologies business unit at LANXESS.
The market for reverse osmosis membrane elements is currently projected to continue growing at an above-average annual rate of ten percent (CAGR 2015-2020) in the years ahead. Because the plant was already operating almost at the limit of its capacity, LANXESS decided to double it.
Production of membrane elements for the Lewabrane line is a multi-stage process. It begins with the fabrication of a thin-film composite membrane comprising several individual layers. A polysulfone base layer and an active filter layer are applied on a nonwoven base substrate. The filter layer is made of polyamide and applied in a complex coating process. Produced as flat components, the reverse osmosis membranes are then wound by fully automated autowinders into spiral-shaped elements. This design helps to conduct untreated water towards the membrane surface and to collect the permeate (filtrate).
New Lewabrane ULP range expands membrane portfolio for water treatment
LANXESS has been continuously expanding its line of membrane elements since production began in September 2011 and the products were introduced to the market in early 2012. Today, numerous types of Lewabrane elements are available in different sizes, which can be optimized for high fouling resistance, high energy efficiency or high performance.
The new Lewabrane RO ULP line is the latest addition. These “Ultra Low Pressure” elements display higher water permeability than the standard elements, while offering the same high level of rejection of critical substances. The operating pressure required in the pressure vessel is 40 percent lower, which reduces operating costs. Furthermore, the new membranes are a good option for removing micropollutants from wastewater and drinking water.
Most read news
Organizations
Other news from the department manufacturing
These products might interest you

Anopore™ by Cytiva
Precise filtration made easy with Anopore inorganic membranes
The aluminum oxide filter membrane that can increase the purity or yield of your analyte

Hahnemühle LifeScience Catalogue Industry & Laboratory by Hahnemühle
Wide variety of Filter Papers for all Laboratory and Industrial Applications
Filtration Solutions in the Life Sciences, Chemical and Pharmaceutical Sectors

Get the chemical industry in your inbox
By submitting this form you agree that LUMITOS AG will send you the newsletter(s) selected above by email. Your data will not be passed on to third parties. Your data will be stored and processed in accordance with our data protection regulations. LUMITOS may contact you by email for the purpose of advertising or market and opinion surveys. You can revoke your consent at any time without giving reasons to LUMITOS AG, Ernst-Augustin-Str. 2, 12489 Berlin, Germany or by e-mail at revoke@lumitos.com with effect for the future. In addition, each email contains a link to unsubscribe from the corresponding newsletter.
Most read news
More news from our other portals
Last viewed contents

A new thermoelectric material for a sustainable society - The first synthesis of bulk CaMgSi with thermoelectric properties

Saperatec GmbH - Bielefeld, Germany
Stratophase receives £2.5m follow-on investment - New funding supports roll out of Early Access Programme for SpectroSens real-time monitoring technology
