The “fool’s gold battery”
Environmentally friendly
High-performance lithium ion batteries face a major problem: Lithium will eventually start to run out as batteries are deployed in electric cars and stationary storage units. Researchers from Empa and ETH Zurich have now discovered an alternative: the “fool’s gold battery”. It consists of iron, sulfur, sodium and magnesium – all elements that are in plentiful supply. This means that giant storage batteries could be built on the cheap and used stationary in buildings or next to power plants, for instance.
Pyrite nanocrystals under the electron microscope, which make up the cathode in the fool’s gold battery
Empa
There is an urgent need to search for low-priced batteries to store electricity. Intermittency of green electricity is affecting the power grids, calling for stationary storage units to be connected into a smart grid., Electric cars are of increasing popularity, but are still to explensive. Efficient lithium ion batteries we know are not suitable for large-scale stationary storage of electricity; they are just too expensive precious lithium is too scarce. A cheap alternative is called for – a battery made of inexpensive ingredients that are available in abundance. But electrochemistry is a tricky business: Not everything that’s cheap can be used to make a battery.
Safe, durable and affordable
Maksym Kovalenko, Marc Walter and their colleagues at Empa’s Laboratory for Thin Films and Photovoltaics have now managed to pull off the unthinkable: by combining a magnesium anode with an electrolyte made of magnesium and sodium ions. Nanocrystals made of pyrite – more commonly known as fool’s gold – serve as the cathode. Pyrite is crystalline iron sulfide. The sodium ions from the electrolyte migrate to the cathode during discharging. When the battery is recharged, the pyrite re-releases the sodium ions. This so-called sodium-magnesium hybrid battery already works in the lab and has several advantages: The magnesium as the anode is far safer than highly flammable lithium. And the test battery in the lab already withstood 40 charging and discharging cycles without compromising its performance, calling for further optimization.
The biggest advantage, however, is the fact that all the ingredients for this kind of battery are easily affordable and in plentiful supply: Iron sulfide nanocrystals, for instance, can be produced by grinding dry metallic iron with sulfur in conventional ball-mills. Iron, magnesium, sodium, and sulfur are amongst hold 4th, 6th, 7th and 15th place by the abundance in the Earth’s crust(by mass). One kilogram of magnesium costs at most four Swiss francs, which makes it 15 times cheaper than lithium. There are also savings to be made when it comes to constructing the cheap batteries: Lithium ion batteries require relatively expensive copper foil to collect and conduct away the electricity. For the fool’s gold battery, however, inexpensive aluminum foil is perfectly sufficient.
Potential for storing the electricity produced annually at Leibstadt power station
The researchers primarily see potential in their development for large network storage batteries. The fool’s gold battery is not suitable for electric cars – its output is too low. But wherever it boils down to costs, safety and environmental friendliness, the technology is a plus. In their paper recently published in the journal Chemistry of Materials, the Empa researchers propose batteries with terawatts of storage capacity. Such a battery might be used to temporarily store the annual production from the Swiss nuclear power station in Leibstadt, for instance. “The battery’s full potential has not been exhausted yet,” says Kovalenko, who teaches as a professor at ETH Zurich’s Department of Chemistry and Applied Biosciences alongside his research at Empa. “If we refine the electrolytes, we’re bound to be able to increase the electric voltage of the sodium-magnesium hybrid cell even further and to extend its cycling life.” He adds: “We also look for investors willing to support research into such post-Li-ion technologies and bring them to the market”.
Original publication
Other news from the department science
![[Fe]-hydrogenase catalysis visualized using para-hydrogen-enhanced nuclear magnetic resonance spectroscopy](https://img.chemie.de/Portal/News/675fd46b9b54f_sBuG8s4sS.png?tr=w-712,h-534,cm-extract,x-0,y-16:n-xl)
These products might interest you
Battery Testing Services by Battery Dynamics
Learn more about the performance and service life of your battery cells in less time
Benefit from modern measurement technology and an experienced team
Batt-TDS by ystral
YSTRAL Batt-TDS mixing and dispersing machine
Boost your battery slurry process
Get the chemical industry in your inbox
From now on, don't miss a thing: Our newsletter for the chemical industry, analytics, lab technology and process engineering brings you up to date every Tuesday and Thursday. The latest industry news, product highlights and innovations - compact and easy to understand in your inbox. Researched by us so you don't have to.
Most read news
More news from our other portals
See the theme worlds for related content
Topic World Battery Technology
The topic world Battery Technology combines relevant knowledge in a unique way. Here you will find everything about suppliers and their products, webinars, white papers, catalogs and brochures.
Topic World Battery Technology
The topic world Battery Technology combines relevant knowledge in a unique way. Here you will find everything about suppliers and their products, webinars, white papers, catalogs and brochures.
