Combined microscopy technique catches light-driven polymers in the act

Researchers combine high-speed atomic force microscopy with a laser light source for real-time observation of azo-polymer films

13-Mar-2024

Expanding our scientific understanding often comes down to getting as close a look as possible at what is happening. Now researchers from Japan have observed the nanoscale behavior of azo-polymer films while triggering them with laser light.

In a study published last month in Nano Letters the researchers from Osaka University used tip-scan high-speed atomic force microscopy (HS-AFM) combined with an optical microscope to create movies as the polymer films changed.

Azo-polymers are photoactive materials, meaning they undergo changes when light is shined on them. Specifically, light changes their chemical structure, which alters the surface of the films. This makes them interesting for applications such as optical data storage and providing light-triggered motion.

Chemists uncover cracks in the amour of cellulose nanocrystals

The most detailed look yet at the surface chemistry and structure of individual cellulose nanocrystal particles

Read news

Being able to initiate these changes with a focused laser light while capturing images is known as in situ measurement.

“It is usual to investigate changes in polymer films by subjecting them to a treatment, such as irradiating with light, and then making measurements or observations afterwards. However, this provides limited information,” explains study lead author Keishi Yang. “Using an HS-AFM setup including an inverted optical microscope with a laser, allowed us to trigger changes in azo-polymer films while observing them in real time with high spatiotemporal resolution.”

The HS-AFM measurements were able to track the dynamic changes in the surfaces of the polymer films in movies with two frames per second. It was also found that the direction of the polarized light used had an influence on the final surface pattern.

Further investigation using the in situ approach is expected to lead to a thorough understanding of the mechanism of light-driven azo-polymer deformation, allowing the potential of these materials to be maximized.

“We have demonstrated our technique for observing polymer film deformation,” says study senior author Takayuki Umakoshi. “However, in doing so, we have shown the potential of combining tip-scan HS-AFM and a laser source for use across materials science and physical chemistry.”

Materials and processes that respond to light are important in a wide range of fields in chemistry and biology, including sensing, imaging, and nanomedicine. The in situ technique provides an opportunity to deepen understanding and maximize potential and are hence expected to be applied to various optical devices.

Original publication

Keishi Yang, Feng-Yueh Chan, Hiroki Watanabe, Shingo Yoshioka, Yasushi Inouye, Takayuki Uchihashi, Hidekazu Ishitobi, Prabhat Verma, Takayuki Umakoshi; "In Situ Real-Time Observation of Photoinduced Nanoscale Azo-Polymer Motions Using High-Speed Atomic Force Microscopy Combined with an Inverted Optical Microscope"; Nano Letters, Volume 24, 2024-2-26

https://www.chemeurope.com/en/news/1182940/combined-microscopy-technique-catches-light-driven-polymers-in-the-act.html