From Climate Gas to Raw Material
DFG Focus on Green Chemistry under Fluctuating Conditions
Wouldn't that be an elegant solution: to use the substance that is most damaging to the climate and threatens the future as a raw material for economic goods and everyday items? In fact, carbon dioxide (CO2), an unavoidable byproduct of civilization, is already being used in the laboratory to produce lower olefins, alcohols and fuels in combination with hydrogen and other chemical reactants, all of which can be obtained sustainably. For such processes to become industrial practice, they must be able to run under "fluctuating" conditions. A DFG priority program is exploring the fundamentals for this, and LIKAT is involved.
"Fluctuating" means that these processes must also function with fluctuating supplies of energy and starting materials. This is new for chemistry, but cannot be avoided if the energy, for example for the production of hydrogen by electrolysis, is to come from renewable sources such as sun and wind in the future. These are not available continuously and not at all on windless nights.
However, the influence of dynamic conditions on chemical reactions has hardly been studied so far, as Prof. Dr. Angelika Brückner and Prof. Dr. Evgenii Kondratenko at the Rostock Leibniz Institute for Catalysis explain. Their research group is involved in the DFG program with work on developing catalysts for CO2 hydrogenation to higher hydrocarbons under fluctuating conditions.
From Climate Gas to Raw Material
In the grand scheme of things, the goal is to replace petroleum as a raw material base and at the same time to ennoble a problematic waste gas, carbon dioxide, into a raw material. But CO2 is an inert gas and hardly reacts on its own. To obtain commercially useful compounds, especially basic materials for the chemical synthesis of valuable products, the extremely stable carbon-oxygen bonds in CO2 must be activated. This is done catalytically by hydrogenation, i.e. hydrogen is added, which can produce a variety of different hydrocarbon compounds. The more carbon atoms they contain in the molecule, the higher their valence.
For the process, the chemists involved in the DFG program modified the so-called Fischer-Tropsch synthesis, which was developed almost a hundred years ago for the hydrogenation of carbon monoxide (CO). To do this, they replaced the highly toxic CO with CO2.
Iron Catalyst Changes
The structure and properties of the catalyst play a key role in determining which products are formed during CO2 hydrogenation. In the case of Angelika Brückner and Evgenii Kondratenko, it is an iron catalyst. But not all iron is the same, they say. They discovered that the catalyst changes in the reaction under fluctuating conditions: It keeps forming new "phases and species" in between, they say.
To precisely distinguish between favorable and obstructive phases, the researchers observe the catalyst at work, so to speak. This is done using highly specific operando-spectroscopic analysis methods based on infrared, UV and laser light. The catalyst samples are partly developed by the researchers themselves and partly obtained from their research partner at the Humboldt University in Berlin.
Catalytically, iron is often used in the form of oxides, explains Prof. Kondratenko. "But we prefer to obtain methane with it." With the molecular formula CH4, methane is the main component in natural gas and the simplest hydrocarbon. "However, we are after higher-value hydrocarbons, currently, for example, olefins." These are indispensable basic chemicals that can be further refined chemically.
Active Catalytic Phase: Iron Carbide
The Rostock scientists discovered that one phase in particular is crucial for CO2 hydrogenation, in which iron carbide is formed at the catalyst surface. And they learned how to stabilize this carbide phase and avoid the interfering phases. For example, by using iron oxalate, an iron salt of oxalic acid (FeC2O4), instead of the usual iron oxide as the catalyst material. The team recently published two articles on this topic in the magazines CATALYSIS SCIENCE & TECHNOLOGY and JOURNAL OF CATALYSIS.
A third publication of the group, in ACS CATALYSIS, reports on the problem of the decreasing activity of the iron catalyst. As a cause, the Rostock chemists discovered intermediates that convert to coke under certain circumstances. This is deposited as a tough layer on the catalyst surface and obscures the active species.
Vision: CO2 Circular Economy
The DFG Priority Program 2080 "Catalysts and Reactors under Dynamic Operating Conditions for Energy Storage and Conversion", in which operando characterization methods are developed and applied, theoretical calculations and kinetic modeling are carried out, is now in its second funding phase and will be funded with 428,700 euros until 2025 for the work at LIKAT alone. The project coordinator is Professor Dr. Jan-Dierk Grunwaldt at the Karlsruhe Institute of Technology.
For future plants, the vision would be to convert the carbon dioxide right where it accumulates en masse and use it as a raw material, say Prof. Dr. Brückner and Prof. Dr. Kondratenko. In accordance with the principles of green chemistry and the circular economy, such a process would be particularly suitable in the environment of the currently largest CO2 emitters, such as the cement industry, iron and steel production and the chemical industry itself, where the CO2 can be further processed with "green" hydrogen into valuable hydrocarbons.
Original publication
Qingxin Yang, Henrik Lund, Stephan Bartling, Frank Krumeich, Andrey S. Skrypnik, Evgenii V. Kondratenko; "The role of Na for efficient CO2 hydrogenation to higher hydrocarbons over Fe-based catalysts under externally forced dynamic conditions"; Journal of Catalysis, Volume 426
Andrey S. Skrypnik, Henrik Lund, Qingxin Yang, Evgenii V. Kondratenko; "Spatial analysis of CO2 hydrogenation to higher hydrocarbons over alkali-metal promoted iron(
Other news from the department science
Get the chemical industry in your inbox
From now on, don't miss a thing: Our newsletter for the chemical industry, analytics, lab technology and process engineering brings you up to date every Tuesday and Thursday. The latest industry news, product highlights and innovations - compact and easy to understand in your inbox. Researched by us so you don't have to.
