Audi and Krajete Filter CO₂ Out of the Air
Filter more CO₂ in less time thanks to the new direct air capturing method
AUDI AG
The latest example of the two partners’ development work is a new plant in Austria, where we are using an inorganic filter material that can hold a very high load of molecules and is also very insensitive to the effects of moisture. As a result, it is not necessary, or only necessary in particular cases, to pre-dry the ambient air to be filtered. This increases efficiency and reduces costs. The temperature and pressure conditions for absorbing CO2 molecules and subsequently removing them from the adsorption surface are very similar. This significantly shortens the adsorber’s loading and discharge cycles. In other words, more CO2 can be removed from the ambient air in a short period of time. The filtered air is released back into the environment after the adsorption step. The recovered CO2 is then available in a highly concentrated form as a raw material for permanent storage or for a wide range of industrial applications. The large-scale plant near Linz, which is currently in the process of going into operation, can filter 500 tons of CO2 per year. By the end of the year, another module will increase the plant’s capacity to 1,000 tons. The electricity required to operate the plant comes from a photovoltaic system on the company’s premises.
Alexander Krajete, CEO of the technology development company that bears his name, says that “we started from the premise that, for reasons of efficiency, we would let the process run at ambient pressure. Then we modified the adsorber materials and the physical conditions in the plant until we found the optimal flow rate, meaning we filtered the maximum amount of CO2 per unit of time.” This made it possible to significantly reduce the cost of sequestration, which is already down to the low three-digits range in euros per ton of CO2. The long-term goal is to make carbon dioxide usable for industrial purposes. In doing so, Krajete GmbH and AUDI AG want to facilitate breakthroughs in the necessary applications.
“The technology makes it possible to remove CO2 directly from the atmosphere, regardless of location, and is therefore an important decarbonizing measure,” says Hagen Seifert, Head of Sustainable Product Concepts at AUDI AG. “In addition, the system technology can be expanded in a variety of ways thanks to its modular design.”
As a next step to the existing large-scale plant in Linz, AUDI AG is currently looking into the possibility of using sources with higher concentrations of CO2 and filtering additional emissions such as nitrogen oxides. In addition, DAC technology could be implemented on a much larger scale at Audi’s site in Győr, Hungary. A plant with a capacity of 25,000 tons per year is conceivable.
Other news from the department research and development
Get the chemical industry in your inbox
From now on, don't miss a thing: Our newsletter for the chemical industry, analytics, lab technology and process engineering brings you up to date every Tuesday and Thursday. The latest industry news, product highlights and innovations - compact and easy to understand in your inbox. Researched by us so you don't have to.
Most read news
More news from our other portals
Something is happening in the chemical industry ...
This is what true pioneering spirit looks like: Plenty of innovative start-ups are bringing fresh ideas, lifeblood and entrepreneurial spirit to change tomorrow's world for the better. Immerse yourself in the world of these young companies and take the opportunity to get in touch with the founders.