To use all functions of this page, please activate cookies in your browser.
my.chemeurope.com
With an accout for my.chemeurope.com you can always see everything at a glance – and you can configure your own website and individual newsletter.
- My watch list
- My saved searches
- My saved topics
- My newsletter
Precipitation (chemistry)Precipitation is the formation of a solid in a solution during a chemical reaction. When the chemical reaction occurs the solid formed is called the precipitate. This can occur when an insoluble substance, the precipitate, is formed in the solution due to a reaction or when the solution has been supersaturated by a compound. The formation of a precipitate is a sign of a chemical change. In most situations, the solid forms ("falls") out of the solute phase, and sinks to the bottom of the solution (though it will float if it is less dense than the solvent, or form a suspension). Additional recommended knowledge
UsesPrecipitation reactions can be used for making pigments, removing salts from water in water treatment, and for qualitative chemical analysis. This effect is useful in many industrial and scientific applications whereby a chemical reaction may produce a solid that can be collected from the solution by various methods (e.g. filtration, decanting, centrifuging). Precipitation from a solid solution is also a useful way to strengthen alloys; this process is known as solid solution strengthening. MechanismAn important stage of the precipitation process is the onset of nucleation. The creation of a hypothetical solid particle includes the formation of an interface, which requires some energy based on the relative surface energy of the solid and the solution. If this energy is not available, and no suitable nucleation surface is available, supersaturation occurs. Representation using chemical equationsAn example of a precipitation reaction: Aqueous silver nitrate (AgNO3) is added to a solution containing potassium chloride (KCl) and the precipitation of a white solid, silver chloride is observed. (Zumdahl, 2005)
The silver chloride(AgCl) has formed a solid, which is observed as a precipitate. This reaction can be written emphasizing the dissociated ions in a combined solution
A final way to represent a precipitate reaction is known as a net ionic reaction. In this case, any spectator ions (those which do not contribute to the reaction) are left out of the formula completely. This simplifies the above equations to the following:
Cation sensitivityPrecipitate formation is useful in the detection of the type of cation in salt. To do this, an alkali first reacts with the unknown salt to produce a precipitate which is the hydroxide of the unknown salt. To identify the cation, the color of the precipitate and its solubility in excess are noted. Similar processes are often used to separate chemically similar elements, such as the rare earth metals. DigestionDigestion, or precipitate ageing, happens when a freshly-formed precipitate is left, usually at a higher temperature, in the solution from which it is precipitated. It results in cleaner and bigger particles.[1] The physico-chemical process underlying digestion is called Ostwald ripening. CoprecipitationCoprecipitation is the carrying down by a precipitate of substances normally soluble under the conditions employed. It is an important issue in chemical analysis, where it is often undesirable, but in some cases it can be exploited. In gravimetric analysis, it is a problem because undesired impurities often coprecipitate with the analyte, resulting in excess mass. On the other hand, in the analysis of trace elements, as is often the case in radiochemistry, coprecipitation is often the only way of separating an element. References
Further reading
|
|
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Precipitation_(chemistry)". A list of authors is available in Wikipedia. |