Negative luminescence

Negative luminescence is a physical phenomenon by which an electronic device emits less thermal radiation when an electric current is passed through it than it does in thermal equilibrium (current off). When viewed by a thermal camera, an operating negative luminescent device looks colder than its environment.

Additional recommended knowledge

Safe Weighing Range Ensures Accurate Results

Recognize and detect the effects of electrostatic charges on your balance

Weighing the right way

Physics

Negative luminescence is most readily observed in semiconductors. Incoming infrared radiation is absorbed in the material by the creation of an electron–hole pair. An electric field is used to remove the electrons and holes from the region before they have a chance to recombine and re-emit thermal radiation. This effect occurs most efficiently in regions of low charge carrier density.

Negative luminescence has also been observed in semiconductors in orthogonal electric and magnetic fields. In this case, the junction of a diode is not necessary and the effect can observed in bulk material. A term that has been applied to this type of negative luminescence is galvanomagnetic luminescence.

Negative luminescence might appear to be a violation of Kirchhoff's law of thermal radiation. This is not true, as the law only applies in thermal equilibrium.

Another term that has been used to describe negative luminescent devices is "Emissivity switch", as an electric current changes the effective emissivity.

History

This effect was first seen by Russian physicists in the 1960s. Subsequently it was studied in semiconductors such as indium antimonide (InSb), germanium (Ge) and indium arsenide (InAs) by workers in West Germany, Ukraine (Institute of Semiconductor Physics, Kiev), Japan (University of Chiba) and the USA. It was first observed in the mid-infrared (3-5 µm wavelength) in the more convenient diode structures in InSb heterostructure diodes by workers at the Defence Research Agency, Great Malvern, UK (now QinetiQ). These British workers later demonstrated LWIR band (8-12 µm) negative luminescence using mercury cadmium telluride diodes.

Later the Naval Research Laboratory, Washington DC, started work on negative luminescence in mercury cadmium telluride (HgCdTe). The phenomenon has since been observed by several university groups around the world.

References

• Applications of negative luminescence, T. Ashley, C. T. Elliott, N. T. Gordon, T. J. Phillips and R. S. Hall, Infrared Physics & Technology, Vol. 38, Iss. 3 Pages 145-151 (1997) doi:10.1016/S1350-4495(96)00038-2
• Negative luminescence and its applications, C. T. Elliott, Philosophical Transactions: Mathematical, Physical and Engineering Sciences, Vol. 359 (1780) pp. 567-579 (2001) doi:10.1098/rsta.2000.0743
• Galvanomagnetic luminescence of indium antimonide, P. Berdahl and L. Shaffer, Applied Physics Letters vol. 47, Iss. 12, pp. 1330-1332 (1985) doi:10.1063/1.96270
• Negative luminescence of semiconductors, P. Berdahl, V. Malyutenko, and T. Morimoto, Infrared Physics (ISSN 0020-0891), vol. 29, 1989, p. 667-672 (1989) doi:10.1016/0020-0891(89)90107-3

Patent

• U.S. Patent 6,091,069 , Ashley et al., July 18 2000, Infrared optical system (Cold shield)