Frost line (polymers)

The frost line is a term used in plastic film manufacturing by extrusion. It refers to the point beyond the die where the temperature of the molten plastic falls below the softening point and the diameter of the extruded plastic bubble stabilizes. The term was borrowed from the notion of "frost line" in soil science and refers to the frosted appearance of the plastic film above the "frost line".

Additional recommended knowledge

Safe Weighing Range Ensures Accurate Results

Weighing the right way

Recognize and detect the effects of electrostatic charges on your balance

The distance from the die is called the height of the frost line. It depends on various factors, including the melt temperature, the speed of cooling, the extrusion speed, and the diameter of the bubble. The notion is important, since the higher the frost line, the more difficult to control the uniformity of the film thickness.

For example, a higher frost line due to higher melt temperature and/or lower cooling rate means a longer time to solidify, and a more smooth and transparent film is produced.