Freshwater pearl

Freshwater pearls are a kind of pearl that comes from freshwater mussels. They are produced in Japan and the United States on a limited scale, but are now almost exclusive to China The U.S. Federal Trade Commission requires that freshwater pearls are referred to as "freshwater cultured pearls" in commerce.

Additional recommended knowledge

What is the Correct Way to Check Repeatability in Balances?

Correct Test Weight Handling Guide: 12 Practical Tips

What is the Sensitivity of my Balance?

Current and historic industry

Although the Japanese freshwater pearl industry has nearly ceased to exist, it does hold special historic value as the first country to cultivate whole freshwater pearls in Lake Biwa, utilizing the Biwa pearly mussel (Hyriopsis schlegeli). The industry attempted a come back with a mussel hybrid (Hyriopsis schlegeli/Cristaria plicata) in Lake Kasumigaura in the last decade, but this venture also met with failure, with production ceasing in 2006. The pearl farm in Tennessee also holds special historic value as it is the only freshwater pearl outside of Asia, founded by the late John Latendresse, it continues as a tourist attraction. Today China is the only commercial producer of freshwater pearls, producing as much as 1500 tons (2005) ^[1] using the triangle shell mussel (Hyriopsis cumingii) and several hybrids that have shown heterosis from several mussel species.

Grafting

  Chinese freshwater mussels were once grafted up to 50 times per shell, or 25 times per valve. This practice was common when the industry mussel was primarily the cockscomb pearl mussel (Cristaria plicata). This mussel produced a high volume of low quality pearls that came to be known as Rice Krispie pearls in the 1970s and 1980s. More than a decade ago the freshwater pearl industry of China shifted production from the cockscomb to the triangle shell mussel (Hyriopsis cumingii). While the triangle shell produced fewer pearls, accepting only 12-16 grafts per valve for a total production of 24 to 32 pearls, the difference in quality was substantial.

The grafting process begins by selecting a suitable donor mussel and cutting a strip of tissue from the mantle. This strip of tissue is then cut into 3mm squares. These squares are delivered to a technician who performs the operation. Unlike saltwater bead nucleation, this process is not considered difficult, and technicians need only minimum training to perform the operation. The technician creates small incisions on the upper valve, and inserts the tissue piece. A small twist of the tissue upon insertion is believed to create a higher ratio of round pearls. After the maximum number of grafts have been performed, the mussel is flipped, and the procedure is performed once again on the reverse side of the valve.

Processing

Freshwater pearl harvests are typically purchased while still in the shell. After harvest the pearls are delivered to a first stage factory. This factory is responsible for cleaning and sorting the pearls by size and shape. After this process has been completed, the pearls are considered ready material for processing factories. These smaller factories perform the treatments ^[2] that are nearly universal to all freshwater pearls. The pearls are pre-treated in a warm and cold chemical solution and then bleached. The pearls that exhibit strong coloration will only go through the treatment.

After the pearls are bleached they are drilled and then polished with a mixture of cornmeal and wax. Finally they are matched into temporary strands, which are then matched again into hanks. Hanks are composed of 5 to 10 temporary strands and are considered wholesale ready.

References

1. ^ [1] Aquaculture in China - Freshwater Pearl Culture
2. ^ [2] Pearl Treatments