Evaporation pond

  Evaporation ponds are artificial ponds with very large surface areas that are designed to efficiently evaporate water by sunlight and exposure to the ambient temperatures.

Additional recommended knowledge

How to quickly check pipettes?

Recognize and detect the effects of electrostatic charges on your balance

Essential Laboratory Skills Guide

Uses

Evaporation ponds have several uses. Salt evaporation ponds produce salt from seawater. They are also used to dispose of brine from desalination plants. Mines use ponds to separate ore from water. Evaporation ponds at contaminated sites remove the water from hazardous waste, which greatly reduces its weight and volume and allows the waste to be more easily transported, treated and stored. It is important to understand that evaporation is not the same as condensation although evaporation in an enclosed environment can subsequently lead to the condition of condensation as evaporated moisture is "condensed" out of the air and is reverted back to a liquid stage.

Evaporation ponds can also be used to evaporate the precipitation that falls on a contaminated site. The contaminants that the water picks up on the ground are left behind after it evaporates. This prevents the contamination from spreading further down the watershed.

Evaporation ponds are used to prevent pesticides, fertilizers and salts from agricultural wastewater from contaminating the water bodies they would flow into. In California, selenium in agricultural wastewater has been especially problematic, causing birth defects in waterfowl.

References

• California Department of Water Resources - Evaporation Ponds
• University of Wyoming - Design Information for Evaporation Ponds in Wyoming
• USDA - Turning Evaporation Ponds into Arable Land
• World Bank - AgWater Sourcebook