My watch list
my.chemeurope.com  
Login  

Delayed coker



A delayed coker is a type of coker whose process consists of heating a residual oil feed to its thermal cracking temperature in a furnace with multiple parallel passes. This cracks the heavy, long chain hydrocarbon molecules of the residual oil into coker gas oil and petroleum coke.[1][2][3] Delayed coking is one of the unit processes used in many oil refineries.

Contents

Description

Cracking begins in the furnace, continues in the transfer line, and finishes in the coke drum.

As cracking continues in the drum, gas oil and lighter components are generated in vapor phase and separate from the liquid and solids. The drum effluent is vapor only except for any liquid or solids entrainment, and is directed to a fractionation column where it is separated into the desirable boiling point fractions. Solid coke is deposited in the drum in a porous structure that allows flow through the pores. All solids and uncracked residual liquid produced from the vapor and liquid feed are intended to remain in the drum.

After the drum is full of the solidified coke, the hot mixture from the furnace is switched to a second drum. While the second drum is filling, the full drum is steamed to further reduce hydrocarbon content of the petroleum coke, and then water quenched to cool it. The top and bottom heads of the full coke drum are removed, and the solid petroleum coke is then cut from the coke drum with a high pressure water nozzle, where it falls into a pit, pad, or sluiceway for reclamation to storage.

Larger cokers have several pairs of tandem drums.

Typical schematic flow diagram

 

Composition of coke

The table below illustrates the wide range of compositions for raw petroleum coke (referred to as green coke[4]) produced in a delayed coker and the corresponding compositions after the green coke has been calcined at 2375 °F (1302 °C):

Composition Of Coke From A Delayed Coker
Component Green coke
as produced
Coke calcined
at 2375 °F
Fixed carbon, wt %80 − 95 98.0 − 99.5
Hydrogen, wt %3.0 − 4.5 0.1
Nitrogen, wt %0.1 − 0.5  
Sulfur, wt %0.2 − 6.0  
Volatile matter, wt %5 − 15 0.2 − 0.8
Moisture, wt %0.5 − 10 0.1
Ash, wt %0.1 − 1.0 0.02 − 0.7
Density, g/cc1.2 − 1.6 1.9 − 2.1
Metals, ppm weight:
     Aluminum15 − 100 15 − 100
     Boron0.1 − 15 0.1 − 15
     Calcium25 − 500 25 − 500
     Chromium5 − 50 5 − 50
     Cobalt10 − 60 10 − 60
     Iron50 − 5000 50 − 5000
     Manganese2 − 100 2 − 100
     Magnesium10 − 250 10 − 250
     Molybdenum10 − 20 10 − 20
     Nickel10 − 500 10 − 500
     Potassium20 − 50 20 − 50
     Silicon50 − 600 50 − 600
     Sodium40 − 70 40 − 70
     Titanium2 − 60 2 − 60
     Vanadium5 − 500 5 − 500

See also

References

  1. ^ Gary, J.H. and Handwerk, G.E. (1984). Petroleum Refining Technology and Economics, 2nd Edition, Marcel Dekker, Inc. ISBN 0-8247-7150-8. 
  2. ^ Leffler, W.L. (1985). Petroleum refining for the nontechnical person, 2nd Edition, PennWell Books. ISBN 0-87814-280-0. 
  3. ^ Petroleum Coke Glossary
  4. ^ Petroleum coke on the website of the IUPAC Compendium of Chemical Terminology
 
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Delayed_coker". A list of authors is available in Wikipedia.
Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE