Conchoidal fracture

  Conchoidal fracture describes the way that brittle materials break when they do not follow any natural planes of separation. Materials that break in this way include flint and other fine-grained minerals, as well as most amorphous solids, such as obsidian and other types of glass.

Additional recommended knowledge

Better weighing performance in 6 easy steps

Safe Weighing Range Ensures Accurate Results

How to quickly check pipettes?

Conchoidal fractures can also occur in other material under favorable circumstances. This material property was widely used in the Stone Age to make sharp tools, and minerals that fractured in this fashion were widely traded as a desirable raw material.

Conchoidal fractures often result in a curved breakage surface that resembles the rippling, gradual curves of a mussel shell; the word "conchoid" is derived from the word for this animal. A swelling appears at the point of impact called the bulb of percussion. Shock waves emanating outwards from this point leave their mark on the stone as ripples. Other conchoidal features include small fissures emanating from the bulb of percussion.

They are defined in contrast to the faceted fractures often seen in single crystals such as semiconductor wafers and gemstones, and the high-energy ductile fracture surfaces desirable in most structural applications. See the main article on Fracture.

Conchoidal fractures form the basis of flint knapping, since the shape of the broken surface is controlled only by the stresses applied, and not by some preferred orientation of the material. This property also makes such fractures useful in engineering, since they provide a permanent record of the stress state at the time of failure. As conchoidal fractures can be produced only by mechanical impact, rather than frost cracking for example, they can be a useful method of differentiating prehistoric stone tools from natural stones.